Benefits of designing Flex and Flex-Rigid

From design, to manufacturing.

Working with our engineers and technical teams, we are here to support you. From early concepts through to production, helping you choose the right stack-up, materials, and construction for your mechanical and electrical requirements.

Why choose Flex and or Flex-Rigid PCBs for your high reliability electronics...

  • Reduced Cost (total solution) – Typically 30%+
  • Reduced weight – Typically 70%
  • Space Saving – Typically 60%
  • Increased Reliability
  • Mechanical repeatability
  • Eliminate connectors and harnesses in moving assemblies.
  • Reduce assembly time and potential points of failure.
  • Conformability (3D)
  • Enable compact, folded, or 3D packaging concepts.

Designing with flex & flex-rigid

We support you from early concept through to production, helping you choose the right stack-up, materials, and construction for your mechanical and electrical requirements.

flex6

Flex layers (typical)

1–12L (Higher counts on request)

flex5

Rigid layers (typical)

1–30L (Dependent on stack-up and materials)
Untitled design (3)

Min. track/space*

75 / 100 μm *Please confirm for your specific design

Flex solutions for your business

When to choose flex PCBs

Use flex circuits when you need a lightweight, bendable interconnect between boards, displays, sensors, or other modules. They are ideal where space is limited or where repeated motion is expected.

  • Dynamic bending around hinges and enclosures.
  • Replacing traditional wiring harnesses.
  • Connecting PCBs on different planes.

When to choose flex-rigid PCBs

Flex-rigid PCBs integrate rigid sections and flexible interconnects in a single structure, simplifying assembly and enhancing reliability in complex 3D designs.

  • Complex folded or multi-board assemblies.
  • Applications where connectors are problematic.
  • High-reliability or harsh-environment products.

Single and double-sided flex

This is generally the lowest cost option available and replaces conventional point to point connections.

Single and double sided flexible pcbs are suitable for dynamic applications (non-plated sections).

Multi-Layer Flex

Is a full flex pcb for more complex designs (up to 12 layers).

Flex-Rigid

A pcb with a combination of flexible and rigid materials (up to 12 layers).

Typical technical capabilities

The values below are indicative. Please contact us to confirm for your specific design.

Parameter

Flex

    Flex-Rigid

Layers (typical)     1-30      1-30 (rigid), 1-12 (flex)
Base material     Polymide       FR-4 + polyimide
Copper thickness     5-700μm      12.5 70μm (rigid & flex)
Min. track / space     75 / 100μm      75 / 100μm
Drill / via options     Plated through-holes      Through-holes, buried / blind vias*
Coverlay/solder mask     Polyimide coverlay      Coverlay in flex, mask on rigid

Typical Applications

Flex and flex-rigid technology is widely used wherever reliability, weight reduction, or 3D packaging is critical.

Medical & wearables

  • Patient monitoring equipment.
  • Wearable sensors and data loggers.
  • Compact handheld diagnostic devices.

Aerospace & defence

  • Avionics modules and control panels.
  • Ruggedised communications equipment.
  • Space-constrained mission-critical systems.

Industrial & automotive

  • Sensor interconnects and control modules.
  • Hinged displays and operator interfaces.
  • Robotics and motion-control assemblies.

Instrumentation & RF

  • High-density interconnects for test equipment.
  • RF front-end and antenna feed structures.
  • Folded 3D assemblies for compact instruments.

From concept to production

We can engage at any stage, but early involvement helps avoid costly redesigns and ensures your design is optimised for manufacturability.

Step 1

Initial discussion

Share your outline requirements, mechanical constraints, and any existing data (block diagrams, CAD, schematics). We’ll quickly confirm feasibility and likely options.

Step 2

DFM & stack-up proposal

Our engineers review your design, propose suitable stack-ups, materials, and via structures, and highlight any flex-specific design considerations.

Step 3

Prototype build

We manufacture initial prototypes for electrical and mechanical validation. Optional additional testing and documentation can be included to suit your industry.

Step 4

Release to production

Once validated, we lock down the build documentation and move into repeatable production, with clear lead time and batch size options.

Send us an outline of your requirements or existing data, and our team will respond with a practical view of feasibility, lead time, and the next steps.

Need help with design?

Contact our sales team.

Telephone: +44 0(1395) 280100

Email: sales@eurotech-group.co.uk

Modern tech in a digital world
JOSCAR - EUROTECH WEBSITE LOGO white background
Home-Accreditation-3
Home-Accreditation-1
Home-Accreditation-2

Offshore Manufacture

Latest News

Further Update on PCB Laminate Supply

04/09/2026

 Our main goal is to be transparent, keeping our customers informed and up to date. Unfortunately, problems with the PCB laminate supply position have deepened…

Greater PCB capability for our customers

28/08/2026

Over the past 18 months, our Exmouth factory has successfully adapted to accommodate a growing and increasingly diverse range of PCB manufacturing requirements. During this…

Laminate Supply

07/08/2026

Important Update: Laminate Supply and Offshore PCB Manufacturing Following our recent communication regarding the offshore PCB supply chain, we would like to provide a further…