From design, to manufacturing.
Working with our engineers and technical teams, we are here to support you. From early concepts through to production, helping you choose the right stack-up, materials, and construction for your mechanical and electrical requirements.
Why choose Flex and or Flex-Rigid PCBs for your high reliability electronics...
- Reduced Cost (total solution) – Typically 30%+
- Reduced weight – Typically 70%
- Space Saving – Typically 60%
- Increased Reliability
- Mechanical repeatability
- Eliminate connectors and harnesses in moving assemblies.
- Reduce assembly time and potential points of failure.
- Conformability (3D)
- Enable compact, folded, or 3D packaging concepts.
Designing with flex & flex-rigid
We support you from early concept through to production, helping you choose the right stack-up, materials, and construction for your mechanical and electrical requirements.
Flex layers (typical)
1–12L (Higher counts on request)
Rigid layers (typical)
Min. track/space*
Flex solutions for your business
When to choose flex PCBs
Use flex circuits when you need a lightweight, bendable interconnect between boards, displays, sensors, or other modules. They are ideal where space is limited or where repeated motion is expected.
- Dynamic bending around hinges and enclosures.
- Replacing traditional wiring harnesses.
- Connecting PCBs on different planes.
When to choose flex-rigid PCBs
Flex-rigid PCBs integrate rigid sections and flexible interconnects in a single structure, simplifying assembly and enhancing reliability in complex 3D designs.
- Complex folded or multi-board assemblies.
- Applications where connectors are problematic.
- High-reliability or harsh-environment products.
Single and double-sided flex
This is generally the lowest cost option available and replaces conventional point to point connections.
Single and double sided flexible pcbs are suitable for dynamic applications (non-plated sections).
Multi-Layer Flex
Is a full flex pcb for more complex designs (up to 12 layers).
Flex-Rigid
A pcb with a combination of flexible and rigid materials (up to 12 layers).
Typical technical capabilities
The values below are indicative. Please contact us to confirm for your specific design.
Parameter | Flex | Flex-Rigid |
|---|---|---|
| Layers (typical) | 1-30 | 1-30 (rigid), 1-12 (flex) |
| Base material | Polymide | FR-4 + polyimide |
| Copper thickness | 5-700μm | 12.5 70μm (rigid & flex) |
| Min. track / space | 75 / 100μm | 75 / 100μm |
| Drill / via options | Plated through-holes | Through-holes, buried / blind vias* |
| Coverlay/solder mask | Polyimide coverlay | Coverlay in flex, mask on rigid |
Typical Applications
Flex and flex-rigid technology is widely used wherever reliability, weight reduction, or 3D packaging is critical.
Medical & wearables
- Patient monitoring equipment.
- Wearable sensors and data loggers.
- Compact handheld diagnostic devices.
Aerospace & defence
- Avionics modules and control panels.
- Ruggedised communications equipment.
- Space-constrained mission-critical systems.
Industrial & automotive
- Sensor interconnects and control modules.
- Hinged displays and operator interfaces.
- Robotics and motion-control assemblies.
Instrumentation & RF
- High-density interconnects for test equipment.
- RF front-end and antenna feed structures.
- Folded 3D assemblies for compact instruments.
From concept to production
We can engage at any stage, but early involvement helps avoid costly redesigns and ensures your design is optimised for manufacturability.
Step 1
Initial discussion
Share your outline requirements, mechanical constraints, and any existing data (block diagrams, CAD, schematics). We’ll quickly confirm feasibility and likely options.
Step 2
DFM & stack-up proposal
Our engineers review your design, propose suitable stack-ups, materials, and via structures, and highlight any flex-specific design considerations.
Step 3
Prototype build
We manufacture initial prototypes for electrical and mechanical validation. Optional additional testing and documentation can be included to suit your industry.
Step 4
Release to production
Once validated, we lock down the build documentation and move into repeatable production, with clear lead time and batch size options.
Send us an outline of your requirements or existing data, and our team will respond with a practical view of feasibility, lead time, and the next steps.
Need help with design?
Contact our sales team.
Telephone: +44 0(1395) 280100
Email: sales@eurotech-group.co.uk