Please view our latest products and capabilities. The information provided should be used as a guide and in dialogue with our Design for manufacture team, to check if your combination is compatible. Please contact our Sales team for up-to-date capabilities.
This information is also available as a downloadable pdf from our downloads page. Please click the button below.
Manufacturing Capabilities
| Capability | Standard Production | Advanced Capability |
|---|---|---|
| Maximum Production Panel Size | 610 x 457 mm | 610 x 533 mm |
| Board Thickness | 0.25 mm to 5.50 mm Scored:- 0.30 mm to 3.2 mm | 0.10 mm to 5.50 mm Scored:- 0.30 mm to 3.2 mm |
| Minimum Aspect Ratio | Through Hole:- 10 : 1 Blind Hole:- 1 : 1 | Through Hole:- 16 : 1 Blind Hole:- 1 : 1 |
| Multilayer | Maximum:- 24 layers | Maximum:- 48 layers |
| Core Thickness | Minimum:- 0.05 mm Maximum:- 2.40 mm | Minimum:- 0.05 mm Maximum:- 5.5 mm |
| Copper Thickness | Inner:- 18 µm | 35 µm | 50µm Outer:- 12 µm | 18 µm | 35 µm | 70 µm | 105 µm | Other thicknesses available on request |
| Copper Plating | Minimum:- 25 µm Maximum:- 50 µm | Minimum:- 25 µm Maximum:- 210 µm |
| Conductor Width / Spacing | Minimum:- 0.075 mm / 0.075 mm | Minimum:- 0.050 mm / 0.050 mm |
| Annular Ring | Minimum above finished hole size: 0.075mm | Minimum above finished hole size: 0.075mm |
| Inner Layer Clearances | Minimum clearance from copper plane to plated or non-plated hole: 0.3mm | Minimum clearance from copper plane to plated or non-plated hole: 0.3mm |
| Profile Clearances | Minimum clearance from copper plane to circuit profile (Routed): 0.25mm Minimum clearance from copper plane to score centre line: 0.5mm | Minimum clearance from copper plane to circuit profile (Routed): 0.25mm Minimum clearance from copper plane to score centre line: 0.5mm |
Product Range
| Circuit Board | Description |
|---|---|
| Rigid | Multilayer, Double and Single sided |
| Mixed Composite Multilayer Rigid | Mixed material builds |
| Polyimide | Advanced material with exceptional thermal and dielectric properties |
| PTFE | Advanced material with outstanding dielectric properties used for RF/Microwave applications |
| Insulated Metal Substrates (IMS) | Materials designed to aid heat dissipation |
| Flex | Multilayer, Double and Single sided |
| Flex Rigid | PCBs with both Flex and Rigid elements |
Technology
| Technology | Description |
|---|---|
| Blind Vias | Drilled holes within a multilayer PCB connecting the outer layer to one or more inner layers |
| Buried Vias | Drilled holes within a multilayer PCB connecting inner layers |
| Resin-Filled and Plugged vias | IPC types III, IV, V and VI |
| Capped Vias | Resin filled and plated over (IPC type VII) |
Surface Finishes
| Metal Finish | In-House / Sub-Contract | Typical Thickness |
|---|---|---|
| Electroless Nickel Immersion Gold (ENIG) | In-House | Ni 4µm – 6µm Au 0.05µm – 0.1µm |
| Electroless Nickel Electroless Palladium Immersion Gold (ENEPIG) | In-House / Sub-Contract | Ni 3µm – 5µm Pd 0.1µm – 0.5µm Au 0.025µm – 0.05µm |
| Electroplate Gold (Hard) Over Nickel | In-House | Ni 1.0 - 6.0µm Au 1.0µm – 3.0µm |
| Electroless Gold (Soft) Direct Over Copper | In-House | Au 0.05µm – 1.0µm |
| Immersion Silver | In-House | 0.1µm – 0.25µm |
| Immersion Tin | Sub-Contract | Sn 1.0µm – 1.1µm |
| Hot Air Solder Level (HASL) | In-House | 10µm – 25µm |
| Lead-Free Hot Air Solder Level | In-House | 10µm – 25µm |
| Organic Solderability Preservative (OSP) | In-House | 0.2µm |
| Silver Ink | In-House | |
| Carbon Ink | In-House | |
| Solder Mask | In-House | Range of colours and finishes available |